Tag Archives: mud recovery system
Mud Recovery System for HDD Company in Singapore
On April 21st, TR shipped out one set high-standard mud recovery system for HDD(horizontal directional drilling) industry in Singapore. This is the tenth set same system sent to South Asia Territory. With many years development, TR solid control equipment are currently used in many industries such as oil & gas drilling, city bored piling, drilling waste management, and trenchless industry like HDD, tunneling, microtuneling etc.
For this HDD mud recovery system, the total capacity is 500GPM. It includes one mud tank, one TRJBQ11 mud agitator, one TRZS584 shale shaker, one TRQJ250×1S-100×8N mud cleaner, two supply sand pumps TRSB5×4-11J 30kw and one TRSHL150-30 jet mud mixer. TR solids control system ensures good and efficient treatment effects of removing solids particles and gas bubbles in drilling fluids. Our mud system has a good performance of cold resistance and high temperature resistance. Also anti-explosion, anti-leakage, anti-corrosion, raining proof, also adapt to wicked condition of well drilling. At present, TR mud system is very popular among customers.
TR Solids Control is a professional manufacturer of mud recovery system for HDD industry in Chinat. We could provide one-stop service for your drilling requirements. If you have any inquiry about shale shaker, shaker screen, mud agitator, mud cleaner, desilter, desander, decanter centrifuge, shear pump, centrifugal pump, jet mud mixer, etc, welcome to contact us freely. TR will provide our best price and service.
Introduction of mud solid control system
The role of slurry:
cooling the drill bit, carrying drilling cuttings, Balanced formation pressure, to prevent hole sloughing, to prevent the kick.
The function of solid control system:
Remove drilling cuttings to ensure mud performance
Solid control system configuration：
The solid control system is the equipment chosen according to the depth of drilling. The same depth of well in different geographical, equipment choices are also different, but not by much.Generally, we will choose the equipmentthe according to the model of the rig. From ZJ20 to ZJ90, In general, below ZJ30 drilling rig only requires 3 levels of solid control equipment, i.e., drilling fluid shale shaker, desander, desilter. Above ZJ30, it is five levels purification equipment. Mud shale shaker,vacuum degasser, desander,desilter, drilling liquid centrifuge. Among them, mud tank is indispensable. Common mud tank specifications are as follows:95000×2300×2100mm, 125000×2400×2300mm,The number of mud tanks is calculated according to the total volume of drilling mud, Choose the right quantity and size. The total mud capacity of 20 drilling RIGS is about 120 cubic meters, The total mud capacity of 30 drilling RIGS is 240 cubic meters, 40 drilling rigs is 260 cubic meters, 50drilling rigs is 320 cubic meters, 70 drilling rigs is 420 cubic meters. 90 drilling rigs is 540 cubic meters. The amount of circulating mud to be treated is about 65% of the total volume. The disposal capacity of all kinds of solid control equipment can be selected to meet the circulating mud volume or larger. The solid control system is equipped with these basic principle , specific according to the rig model, or customer requirements flexible choice.
Solid control system, mud recovery system, mud purification system
The main equipment in the fixed control system will never change, i.e., 5 levels purification equipment. mud shale shaker, vacuum degasser, desander, desilter, decanter centrifuge. The selection of equipment is flexible according to different drilling RIGS, and other auxiliary equipment is indispensable. Desander, desilter must be powered by sand pump one on one.The centrifuge can choose submersible slurry pump or screw pump for pulp supply. In addition to the shaker screen tank and the air tank, the mud tank must have a mud agitator(The principle is to be bigger than smaller) . Where there is a agitator, a mud gun must be carried. The mud gun can flush the dead Angle of the tank and start the auxiliary agitator. In addition, the jet mud mixer in the solid control system is also indispensable. The jet mud mixer can exist as a single individual or can be connected directly to the end of the mixing tank.Connected by manifold.
TR Solids Control have been focused on solid control equipment more than 10 years. We passed API and ISO9001 certifications early in the industry.Our products have been exported into 40 countries and regions. We provide you with practical solutions and pre-sale and after-sales service. Your satisfaction is our constant pursuit.
Contact Us:TR Solids Control
Sales office：No.10 West of North 2nd Ring Road Xi’an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel：+86-29-86332919
Call：15339143604
E-mail：allan@trsolidscontrol.com
Web:www.chinasolidscontrol.com
www.trsolidscontrol.com
Basic knowledge of mud solid control system
The generation of solid control system:
Mud enters the formation through the drill pipe in the course of drilling. After application, it is discharged together with drilling waste liquid. Mud is expensive and can damage the environment, In this case, the solid control system emerges at the historic moment.
Overview of solid control system:
Solid control system also called Drilling mud circulation system mud purification system. Mud circulation system is one of the important system in the complete set of drilling rig. In the course of drilling, especially in deep well drilling,rock formations, layers of steam, or underground hot springs are often encountered. The great friction of rock blocks is very harmful to the drill bit In the course of rock drilling. It is easy to cause well surge and blowout when gas layer or hot spring is encountered in drilling, mud is used in this case.
Mud usually contains a lot of suspended matter,colloidal water,oil,oil water mixture.Mud can be divided into water-based mud, oil-based mud and mixed mud.Mud can effectively lubricate the bit.Mud with barite and flocculent can effectively balance the bottom pressure.It can prevent well blowout and well surge.
The function of solid control:
Solid control system mainly includes shale shaker, vacuum degasser, desander, desilter, horizontal decanter centrifuge and other solid control equipment.These fixtures are like a series of sieves of different sizes,the mud can be purified by layer filtration.
TR Mud purification system | TR Mud solid control system
Contact Us:TR Solids Control
Sales office：No.10 West of North 2nd Ring Road Xi’an City.
Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.
Tel：+86-29-86332919
Call：15339143604
E-mail：allan@trsolidscontrol.com
Web:www.chinasolidscontrol.com
www.trsolidscontrol.com
